casprinter.blogg.se

Here are instructions on how to accomplish this migration using a current Time Machine backup of your current Mac.

This is supposed to cut through the plastic on the wires and connect them.When you buy a new Mac you likely want to transfer all of your data and applications from your current Mac to a new Mac. In theory, all you need to do is slide the clip over one of the wires running to your backup lights, insert the same colored wire from the transmitter, then use pliers or a similar tool to press down the metal tab. AUTO-VOX includes two clips to make wiring simple. You should be able to find out how to do this with your vehicle online.Īttaching the wires should be easy to, but at least for me, that wasn't the case. For example, all I had to do was remove two bolts and pull the assembly out. To attach the cables, you'll need to access your backup lights, which usually means removing one of the rear light assemblies from your vehicle. Unfortunately, this wasn't as easy as it could have been in my case. The actual installation for the AUTO-VOX W7 should be relatively simple: all you need to do is attach the positive and ground wires from the wireless transmitter to the corresponding wires running to your backup lights. This is where the installation gets tricky, because in order for the camera to activate when you need it, you need to wire the camera to your backup lights. This is because mounting it to the license plate would have required extensive cable rerouting, as the cable was too short to route simply. In my case, since I was attaching the camera to an SUV, I used the adhesive and mounted the camera to the bumper. You can do these either with the adhesive backing on the mount, or by attaching it to one of the screws attaching your license plate to the vehicle. Most people will want to place the camera on or near their license plate for the best line of site. Stick the mount to wherever in your vehicle you want the display to sit, let it take hold, then attach the display to the mount.įinding the right spot for your dashcam or backup camera can be tricky, but here, mounting the camera is similarly simple. All you need to do for the display is remove the protective film from the adhesive on the back of the mount. Actually installing and mounting the AUTO-VOX W7 is a relatively straightforward process.